Go Back   Wiki NewForum | Latest Entertainment News > General Discussion


How to Keep Outside Pipes from Freezing


Reply
Views: 1393  
Thread Tools Rate Thread Display Modes
  #1  
Old 01-14-2020, 04:31 PM
welcomewiki welcomewiki is online now
Member
 
Join Date: Dec 2008
Location: India
Posts: 81,326
Default How to Keep Outside Pipes from Freezing

Preventing exterior pipes from freezing isnít hard to do, but it is important. A frozen pipe may burst, which can lead to expensive and time-consuming repairs. To keep exterior pipes from freezing, protect them with polyethylene pipe insulation and duct tape. In your home, turn the heat on until the weather warms up and keep your cabinet doors open underneath your sink. Leave your sinks on so that a thin trickle of water comes out and keeps the pipes from freezing. In the event that a pipe does freeze, you can use a hair dryer or heating pad to warm the pipe up and clear the ice.

[Edit]Steps

[Edit]Insulating Your Pipes
  1. Survey your exterior pipes to determine which pipes to insulate. Grab a pen, paper, and a measuring tape, and take a walk around your home. Identify any pipes that you want to cover. Measure the length of each exposed pipe that you want to insulate and write it down. For each pipe, note the diameter next to the length.[1]
    • If your house is on risers, get a disposable crawl suit and a flashlight to crawl into your crawlspace and look at your pipes.
    • You can tell if a pipe has water in it by putting your ear up to it and listening carefully. You should be able to hear water rushing through it. You can also tap it with a screwdriver. If the sound is hollow, it probably doesnít have water inside.
    • You donít really need to insulate pipes that contain wires, but you can if youíd like. Pipes that contain wires are typically silver and made of metal. Copper, PVC, or cast iron pipes are more likely to carry water.
  2. Purchase polyethylene insulation for your pipes. Take your list of measurements to your local construction or home repair store. Buy enough pipe insulation to cover all of your pipes by matching the inside diameter of the insulation to the outside diameter of your pipes. The length and interior diameter of a piece of insulation is listed on the packaging, so read the label carefully before buying your insulation.[2]
    • For example, if you have 2 pipes with identical diameters that measure and , you need at least of insulation. Itís always a good idea to have some extra insulation on hand, though!
    • Polyethylene looks like a black foam and is the most commonly-used material to insulate exterior pipes. Fiberglass sleeves are typically used to insulate interior pipes. If youíre using fiberglass sleeves, wear a dust mask, gloves, and protective eyewear.
    • Pipe insulation is precut so that it can wrap around the pipe easily. You can cut it to length with scissors if needed.
  3. Wrap insulation around each of your exposed pipes by hand. To wrap insulation around a pipe, find the vertical seam where the insulation is cut. Dig your fingers into this seam and gently pull the insulation open. Press the inside of the insulation around the pipe and let go of both sides to attach the insulation to the pipe. Repeat this process for each pipe that youíre insulating.[3]
    • Put on a pair of gloves before doing this to avoid burning your hands on hot water pipes.
  4. Secure the insulation with duct tape or cable ties. To keep your insulation from sliding off of your pipes, use duct tape or cable ties. Wrap duct tape around the base of the insulation 4-5 times and pull it tight to keep the insulation in place. Attach cable ties by wrapping the plastic tie around the pipe and threading one end of the tie through the opening on the other end. Secure the tie by pulling firmly on the length that slides through the opening. Work your way up and wrap duct tape or place a cable tie once every . Repeat this process for every pipe.[4]
    • Donít pull so hard on your pipe that you end up ripping it out or cracking it. So long as the ties or tape keep the insulation from sliding around, youíre fine.
[Edit]Using Water and Air to Prevent Freezing
  1. Turn the heat on inside your home and leave it at a steady temperature. Keeping your home heated will ensure that the walls stay warm. If the walls are warm, the pipes leading inside will have a harder time freezing. Turn the heat on to a temperature higher than . Leave the heat where it is and donít turn it down or off when you leave or go to bed.[5]
    • You donít need to set the thermostat to its highest setting to keep your home warm. So long as the air in your home is or hotter, your pipes will be less likely to freeze.
    • Use a space heater or free-standing radiator to heat rooms that have poor circulation. Donít leave a space heater on when you arenít home or go to sleep, though.
  2. Open the cabinets under your sink to improve air flow. Hot air has trouble making its way into your cabinets where your exterior pipes lead inside. To prevent exterior pipes from freezing, improve the air flow where the pipes enter into your home. Go to every sink in your home and open the cabinet doors. Leave them completely open to allow the hot air in your home to make its way under the sink.[6]
    • Keeping your interior pipes warm will prevent the exterior pipes from freezing up.
    • If you have a garage, keep the door closed. Many garages have water lines running underneath or alongside them.
  3. Let water drip from each of your faucets to keep water flowing. Your pipes canít freeze up if the water is constantly moving. To keep water moving through your pipes, turn the handle on each of your sinks and tub to leave a trickle of cold water running at all times.[7]
    • This will increase the price of your water bill, but itís worth it to avoid spending thousands of dollars on a burst pipe that leads to water damage.
[Edit]Thawing a Frozen Pipe
  1. Turn the water on to apply pressure to your pipe. If a pipe freezes, turn on the water at each sink and tub in your home. If water starts building up or no water comes out, your pipe is fully blocked. Turn your frozen faucet off to avoid overflowing your sink or tub. Leave the other lines running while you deal with the blocked pipe by heating it directly.[8]
    • Donít worry if the water backs up. Itíll go down as soon as you heat the pipe directly and the pressure from the water will make this process easier.
    • Itís usually pretty easy to find a frozen pipe. Simply go to the wall outside of the sink or drain where youíre experiencing problems. Youíll find the pipe leading out of the wall or base of your home.
    • The supply line is frozen if no water comes out. The drain line is frozen if water wonít go down.
  2. Use a heating pad or hair dryer to heat a frozen pipe directly. To thaw a pipe out, take a portable heating pad or hair dryer out to the pipe. Turn the heating pad to its highest setting and wrap it around the frozen section. If youíre using a hair dryer, turn it on to the highest setting and run it over the frozen length. After heating the pipe for 10-15 minutes, check your sink to see if the water has gone down or come back on. If it hasnít, repeat this process until the pipe is fully thawed.[9]
    • If you donít have a portable pad or hair dryer, find an outlet outside and use an extension cord to reach your pipe.
    • You can also soak a towel in hot water and layer it around the pipe. This may work, but the towel will freeze if you leave it on for too long.
  3. Call a licensed plumber if you cannot clear the blockage or find the pipe. If you cannot clear the blockage after 30-45 minutes of heating the pipe, there may be a blockage underground or in your wall. If you canít find the pipe, you may need help identifying the source of the problem. Call a licensed plumber immediately to clear the blockage for you. The longer a pipe remain frozen, the more likely it is to burst.
    • A burst pipe can lead to costly repairs and permanent water damage that will require heavy renovations.
[Edit]Tips
  • Pipes are more likely to freeze if itís or colder.
[Edit]Things Youíll Need

[Edit]Insulating Your Pipes
  • Measuring tape
  • Pen or pencil
  • Paper
  • Crawl suit (optional)
  • Flashlight (optional)
  • Pipe insulation
  • Scissors
  • Duct tape or cable ties
[Edit]Thawing a Frozen Pipe
  • Hair dryer
  • Heating pad
  • Extension cord (optional)
[Edit]References
  1. ? https://www.energy.gov/energysaver/s...ot-water-pipes
  2. ? https://www.energy.gov/energysaver/s...ot-water-pipes
  3. ? https://todayshomeowner.com/video/ho...vent-freezing/
  4. ? https://www.energy.gov/energysaver/s...ot-water-pipes
  5. ? https://www.redcross.org/get-help/ho...zen-pipes.html
  6. ? https://www.redcross.org/get-help/ho...zen-pipes.html
  7. ? https://www.consumerreports.org/home...from-freezing/
  8. ? https://www.consumerreports.org/home...from-freezing/
  9. ? https://www.consumerreports.org/home...from-freezing/



More...

Reply With Quote
Reply

Latest News in General Discussion


Thread Tools
Display Modes Rate This Thread
Rate This Thread:



Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2020, vBulletin Solutions, Inc.