11-03-2009, 10:51 AM
|
|
Administrator
|
|
Join Date: Oct 2009
Posts: 5,409
|
|
Inspection Without a Task List or Material
Inspection Without a Task List or Material
Specification
If you want to inspect by batch or according to configuration, but you do not want to use a task list or material specification, you must make entries in the inspection type fields and for the indicators as follows:
Indicators/Fields to be Set
In this field, enter a procedure that copies the quality score from the usage decision code.
Optional Indicators/Fields
The following table provides an overview of the effects of the different settings.
Set Indicators
| What You Should Know
| Manual sample calc.
Manual sample entry
| You must enter the sample size manually
| Manual sample calc.
Inspection %
| You must trigger the sample calculation manually. The system calculates the sample size according to the inspection percentage you entered.
| Manual sample calc.
100% inspection
| You must trigger the sample calculation manually. The entire inspection lot is inspected.
| If you enter an inspection duration, the system automatically calculates the planned start time or the planned end time of the inspection for the inspection lot.
If you enter a sampling procedure, the system calculates the sample size from the lot size, according to this sampling procedure. In addition, the sampling procedure defines the type of valuation that is used to record results.
Indicators/Fields Not to be Set
- Insp. with task list
- Insp. by charac.
- Skips allowed
See also:
Inspection with Task List and/or Material Specification
Last edited by seema; 11-03-2009 at 10:52 AM.
|
